.png)
3-ply Masks
PROTECTION
3-ply Masks
In response to the rapidly growing demand, Italtrim Medical offers 2 families of 3-ply surgical masks reduces the chance of infection and contamination caused by biological particles and infectious agents, fitting into different settings from daily to surgical uses. Both products are manufactured under strict quality control and in compliance with European, American and Chinese standards.
Surgical Masks
- CE approved and FDA cleared
- Proven medical efficiency according to EN 14683:2019 standard
- Biocompatibility: ISO 10993-1:2010 standard
- Fluid resistant and disposable
- Block and hinder possible pathogens carried by the wearer
Simple Face Masks
- Providing basic face coverage
- Designed for everyday use only
PPE Masks
PROTECTION
Personal Protection Equipment (PPE) Masks
Italtrim Medical also offers a variety of particulate respirators for those who are seeking extra protection. The respirator can come either with or without valve, where the valved facilitates exhalation, contributing to users’ comfort and breathability.
Particulate respirators are designed to provide reliable respiratory protection against certain non-oil based particles from grinding, sanding or other dusty operations. In addition, it also helps reduce inhalation exposures to certain airborne biological particles. Please note that with the above proven efficacy, the risk of contracting infection, illness, or disease cannot be fully eliminated.
FFP2 Masks
- Considered Personal Protective Equipments (PPE) category III under EU regulation 2016/425
- European standard for facepiece respirators in accordance with Europe EN 149-2001
- 94% filtration rate against particulates of 0.3 microns
- Valve available – ideal for construction work or DIY
- Equivalent to US NIOSH N95 mask as a general reference
FFP3 Masks
- Considered Personal Protective Equipments (PPE) category III under EU regulation 2016/425
- European standard for facepiece respirators in accordance with Europe EN 149-2001
- 98% filtration rate against 0.3 microns
- Valve available – ideal for construction work or DIY
- Equivalent to US NIOSH N99 mask as a general reference
N95 Masks
- Respirators specially manufactured for the North American market, which reduce wearers’ exposure to particles including small particle aerosols and large droplets (non-oil aerosols only)
- European standard for facepiece respirators in accordance with Europe EN 149-2001
- 95% filtration rate against particulates of 0.3 microns
- Equivalent to US FFP2 mask as a general reference
NOTE: Valved respirators do not filter the exhalation but only the inhalation. It is not recommended to use valved respirators under the epidemic situation as they do not hinder the spread of possible pathogens carried by the wearer, meaning that it can put others around the wearer at risk.
Reusable Masks
PROTECTION
Reusable Masks
Coming with 2 or 3 layers, the 100% polyester-made washable mask is an eco-friendly alternative to the disposable mask, supports up to 30 times of wash. The reusable mask serves as a physical barrier to prevent direct penetration of solids and non-oily liquids for everyday use. Both masks go with adjustable ear loops for the closest fit.
Reusable 2-layer Masks
- The outer layer features a water-repellent and antimicrobial coating, preventing droplets, penetration of liquids (including droplets), spoilage by harmful microorganisms, and reducing odor
- The inner layer resists microbe and boosts the protection effectiveness of the filter materials, maximizing cleanliness and prolonging usability
- Treated with silver chloride on titanium dioxide (EU BPR compliant)
Reusable 3-layer Masks
- The outer layer features a water-repellent and antimicrobial coating, preventing droplets, odor, penetration of liquids (including droplets), and spoilage by harmful microorganisms
- The middle filter layer resists microbe and boosts the protection effectiveness of the filter materials, maximizing cleanliness and prolonging usability
- The inner layer embodies a soft, smooth texture that maximizes comfort and breathability, with activated cooling technology that carries moisture away quickly to sustain more enjoyable wear
- Treated with silver chloride on titanium dioxide (EU BPR compliant)
Coveralls
PROTECTION
Chemical
Protective Overalls
Coveralls are garments that provide protection to the user against a given sets of hazards. They are considered Personal Protective Equipment Category III in compliance with the requirements of the European Directive (EU) 2016/425 as certified by the relative European Notified Body. They are not considered Medical Devices and the size needs to correspond with the user as per the instructions.
- EN ISO 13982-1:2004+A1:2010, Type 5, defining performance requirements for clothing providing protection against airborne solid particulates
- EN ISO 13034:2005+A1:2009, Type 6, defining performance requirements for clothing providing protection against liquid chemicals, light sprays
- EN 1149:2018, , defining performance requirements for clothing providing protection against Electrostatic charges
- EN 1426:2003, , defining performance requirements for clothing providing protection against infective agents
The coveralls are made of non-woven fabric, composed of 50% polypropylene and 50% polyethylene, of 65 g/m2 and they comply with the below standards.
Disposable Gloves
PROTECTION
Disposable Gloves
Italtrim Medical offers disposable protective gloves which feature a wide range of materials and grades. Disposable gloves can be classified into different classes by the level of protection, comfort and durability, fitting into various circumstances. They are either powdered (chalk/ cornstarch) - which are easier to wear but may not be the optimal the considering cleanness and medical concerns; or non-powdered, more preferred in the medical sector. Most disposable gloves drop into one of these types: latex gloves, nitrile gloves and vinyl gloves.
Latex
Great elasticity providing the best fit and comfort and tactile quality. One drawback is that some users might be allergic to latex
Nitrile
As a natural devoid of latex, it is allergy-free and hence preferred by surgeons and doctors
Vinyl
Made from PVC (polyvinyl chloride), usually the cheapest latex-free gloves. However, the mechanical properties are comparatively low
En374: Protection from chemicals and micro-organism
En455: Single-use medical gloves
The gloves also meet the requirements imposed by Regulation EU 1935/2004 for food-graded products.
Face Shields
PROTECTION
Face Shields
Covering partial or entire face and eyes for the wearer, the face shield is designed for protection against risk of exposure to blood, bodily fluids and other hazardous materials through splashing. It is considered PPE CAT I under EU 2016/425, tested on performance requirements related to EN 166 (protection against high-speed particles), providing security for medical procedures and hazardous environments.
Key Features
- Increased airflow
- Optically clear with anti-fog coating
- Ideal also for indoors, air-conditioned venues
- Anti-scratch giving ultra-resilience
- Lens thickness: 1.5mm
Protective Goggles
PROTECTION
Protective Goggles
The protective goggles go under Personal Protective Equipment Category I, which protect the wearer’s partial or entire face and eyes from hazards such as splashes or low-speed objects that might cause injuries, maximizing productivity and safety. The goggles are tested in accordance to performance requirements related to EN 166:2002, catering to your different needs in medical.
Surgical Gowns
PROTECTION
Surgical Gowns
Surgical gowns are protective medical devices used by surgeons and the surgical team for all types of procedures. In the healthcare profession, disposable surgical gown plays a crucial role in asepsis by reducing the transfer of bacteria from the skin of the medical staff to the air and providing a barrier to prevent blood strikethrough and fluid contamination during surgical procedures. The surgical gown comes with two options: sterile or non-sterile. For the sterile, sterilisation procedures have been assessed by the authorized body to be certified. Made in either Italy or China, surgical gowns from both origins are certified in compliance with strict QA standards, safeguarding medical professionals in any operations.
- Single-use
- Secure protection (backed by ultrasonic technology)
- Anti-fluid, anti-alcohol, anti-blood, anti-static
- Durable
- Comfortable, lightweight and breathable
- Tear-resistant
- Flame retardant
Users can pick from the standard or reinforced surgical gowns. Non-reinforced surgical gowns are less durable and designed for surgical procedures with moderate fluid contact. Reinforced surgical gowns have reinforced protection at chest level and on the arms, specifically made for more invasive and intense surgical procedures.
Certificate: CE, FDA, ISO 13485 and EN13795
View CertificationsHair Caps
PROTECTION
Hair Caps
Hair caps are disposable items generally used to maintain and safeguard the environmental hygiene standard. By isolating the wearer’s hair, the equipment serves as a preventive gear, minimising microbial activities that can be potentially carried over by natural hair shedding. The equipment is mainly comprised of a double-layered spunbond non-woven fabric, with grammage ranging from 35 to 50 grams. It is also possible to add more layers of non-woven fabric to enhance its durability and wear-and-tear resistance.
Shoe Covers
PROTECTION
Shoe Covers
Shoe covers are disposable items generally used to maintain and safeguard the environmental hygiene standard. By isolating the wearer’s feet, the equipment serves as a preventive gear, minimising microbial activities that can be potentially carried over by shoe contact with the ground. The equipment is mainly comprised of a double-layered spunbond non-woven fabric, with grammage ranging from 35 to 50 grams. It is also possible to add more layers of non-woven fabric to enhance its durability and wear-and-tear resistance.
